ILOM: How To Check ILOM Network Configuration

Below command can be used for checking the ILOM Network configurations.

show /SP/network

Below is sample output of above command.

Connected. Use ^D to exit.

-> show /SP/network

 /SP/network
    Targets:
        interconnect
        ipv6
        test

    Properties:
        commitpending = (Cannot show property)
        dhcp_clientid = none
        dhcp_server_ip = none
        ipaddress = 10.10.XX.XX
        ipdiscovery = static
        ipgateway = 10.20.XX.XX
        ipnetmask = 255.255.XX.XX
        macaddress = 00:XX.XX.XX.XX
        managementport = /SYS/MB/NET0
        outofbandmacaddress = 00:XX.XX.XX.XX
        pendingipaddress = 10.10.XX.XX
        pendingipdiscovery = static
        pendingipgateway = 10.20.XX.XX
        pendingipnetmask = 255.255.XX.XX
        pendingmanagementport = /SYS/MB/NET0
        pendingvlan_id = (none)
        sidebandmacaddress = 00:XX.XX.XX.XX
        state = enabled
        vlan_id = (none)

    Commands:
        cd
        set
        show

-> Session closed
Disconnected

Products to which Article Applies

All Host Operating Systems Using ILOM

Additional Reference

https://docs.oracle.com/cd/E19203-01/820-1188-12/core_ilom_managing.html#50413602_View%20Network%20Settings%20Using%20the%20CLI

tarun boyella